29
HSCI adapter for OEM machine operating panel
PLB 600x
The PLB 600x HSCI adapter is required in order to connect an
OEM-specific machine operating panel to the MANUALplus 620
The spindle-speed and feed-rate override potentiometers of
the TE 7xx and the HR handwheel are also connected to these
adapters.
•
HSCI interface
•
Connection for HR handwheel
•
Inputs/outputs for keys/key illumination
Terminals for 72 PLC inputs and 40 PLC outputs
•
Screw fastening or top-hat-rail mounting
•
Configuration of the PLC inputs/outputs with the IOconfig
computer software
PLB 6001 ID 668792-xx
Mass
≈ 1.2 kg
PLB 6001
To Next Page
Loading...
