48 I Operating Instructions
I – 5 Milling Patterns
Enter the number of holes per row (4). Press ENT.
Enter the space between holes (10).
Press ENT.
Enter the angle of rotation (18°).
Press ENT.
Enter the depth for drilling (THRU).
Press ENT.
Enter the number of rows (3).
Press ENT.
Enter the spacing between rows (12).
Press ENT.
Press USE.
Press the VIEW () soft key to see graphic.
HOLES PER ROW
HOLE SPACING
ANGLE
DEPTH
NUMBER OF ROWS
ROW SPACING
When in TOOL field enter the TOOL TABLE and select the
desired tool.
To Next Page
Loading...
