Why the control light of the charging station in my Heiniger Electric Shaver is not on?
If the control light of the charging station for your Heiniger Electric Shaver is not on, it could be because the charging station is not connected to the power supply (connect the charging station to the power supply) or the charging station is faulty (have charging station inspected).
Why is my Heiniger Electric Shaver motor running very slowly?
If your Heiniger Electric Shaver motor runs very slowly, it might be because the clipper blades were not oiled sufficiently. Make sure to oil the clipper blades.
What to do if Heiniger Commercial Food Equipment motor is not running?
If the motor of your Heiniger Commercial Food Equipment is not running, there are several possible causes. The battery may be dead, in which case you should charge it. The contacts might be dirty, so switch the clipper off and clean the contacts. The battery could also be faulty, requiring a replacement. Finally, a burning smell from the motor housing indicates a burned-out motor, which means you should have the motor and/or electronics replaced.
Why is my Heiniger Commercial Food Equipment clipper cutting badly?
Several factors can cause your Heiniger Commercial Food Equipment clipper to cut badly or not at all. The clipper blade might be blunt, requiring resharpening by a service center. The clipper blades may not have been correctly ground. Ensure the clipper blades are oiled every 15 minutes. Only clip dry hair. Hairs jammed between the top and bottom blades can be removed by taking off the clipperhead, pushing the top blade half away from the clipperhead, and removing the hairs. Finally, the clipperhead might have too little clipping pressure, requiring inspection.
Operator experience and precautions for safe use.
Explanation of hazard and information symbols used in the manual.
Defines intended use, prohibited uses, and protective equipment.
Guidelines for safe handling of electrical connections and batteries.
Information on warranty terms and manufacturer conditions.
Details on how to contact customer service for information.
Manufacturer's disclaimer regarding product use and modifications.
Specifications for the clipper, charging station, and battery.
Electrical requirements and environmental parameters for operation.
Lists all components included in the product package.
Identifies parts and controls of the clipper and charging station.
Specifics on the charging station and battery components.
Procedures for first-time use, including charging station and battery.
Instructions for fitting, changing clipperheads, and replacing the battery.
Covers clipping, lubrication, and cleaning for ongoing use.
General| Brand | Heiniger |
|---|---|
| Model | saphir |
| Category | Hair Clipper |
| Language | English |
To Next Page
