Heinner HWM-6120 - GREY SPOTS APPEAR ON THE LAUNDRIES

FAULT POSSIBLE CAUSE
TROUBLESHOOTING
Unsatisfactory
washing result.
Water being hard.
( Contaminated, lime
water etc.)
Adjust the amount of
detergent based on the
instruction of detergent
manufacturer.
Laundries distributed
in your machine
nonhomogenously.
Spread your laundry
in the machine
evenly.
As soon as
the machine
is loaded with
water, water
discharges.
The end of water
discharging hose
is too low for the
machine.
Set the water discharging
hose on
appropriate height. (**)
(**)
No water
appears in the
drum during
washing.
No fault. Water is
in the unseen part
of the drum.
Laundries
have detergent
residues
on them.
Non-dissolving
particles of some
detergents may
stick to your
laundries as white
spots.
Perform an extra
rinsing by setting your
machine to “Rinsing”
programme, or clean
the spots using a
brush after your laundries
dry.
Grey spots
appear
on the laundries.
The reason for such
spots may be oil,
cream or ointment.
Apply the maximum
amount of detergent
instructed by the detergent
manufacturer in the
next washing operation.
www.heinner.com
65/74