EasyManua.ls Logo

Heinner HWM-H6010SE Series - VI. Using Your Appliance; Quick Start Guide; Pre-Wash Checks and Preparation

Heinner HWM-H6010SE Series
67 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.heinner.com 6Kg, 220-240V~50Hz, 1000rpm
11
VI. USING YOUR APPLIANCE
Quick Start
Before washing, please make sure its installed properly.
Before washing at first time, the washing machine shall be operated in one round of the
whole procedures without clothes in as follows.
1. Before Washing
Note!
Detergent only need to be added in "case I after selecting pre-washing for machines with
this function.
2. Washing
- Power On
- Select a short programme
- Start
Before Each Washing
The working condition of the washer should be (0-40)°C.If used under 0°C,the inlet valve
and draining system may be damaged. If the machine is placed under condition of 0°Cor
less, then it should be transferred to normal ambient temperature to ensure the water
supply hose and drain hose are not frozen before use.
Please check the labels and the explanation of using detergent before wash. Use
non-foaming or less-foaming detergent suitable for machine washing properly.

Related product manuals