8. OPENING/CLOSING DOOR
After the procedure ends, the "End" indicators is on and the door lock indicator light
goes out. At this time, the door can be opened.
If the door needs to be opened, press “Start/Pause” button, and if the door lock indicator
light flashes, it shows that the unlocking condition is met; in 2 minutes, the door lock
indicators goes out, and at this time, the door can be opened; if the door lock indicators
does not flashes, it shows that the unlocking condition is not met; under such situation, if
the door needs to be opened, turn the programme selector knob on position "OFF" for 3
seconds to turn off the machine and restart the washing machine; select “Spin” procedure,
and set the spin speed as “
0
” . After the procedure operation ends, door lock indicators
goes out, and at this time, the door can be opened.
Never open the door forcibly while the machine is running,otherwise you can damage the
door lock. To open the door, hold the door handle and pull the door. Close the door by
pressing it without excessive force until it clicks shut.
To Next Page
Loading...
Need help?
General
