PROGRAME OPTIONS
1. PROGRAME START
Switch on and select programe required and corresponding function keys, then press the
“Start/Pause” button to run the programme.
2. AUXILIARY FUNCTIONS
Before starting the programme, you can optionally select an auxiliary function. Press on the
button of auxiliary function you would like to select.
If the selected programme and option cannot be combined, these functions will fail to be
selected automatically and indicator will turn off automatically.
SPIN
The programe defaults to the partial max. spin speed. Press button to select other spin
speeds.
If spin speed “0” selected, the last spin process will be canceled and the machine only
dewaters before the end of programme.
TEMP.
Each programme is corresponding to its default temperature. If needed, press “Temp.”
button to adjust.
PREWASH
Select the function to conduct pre-wash so as to enhance washing effects and better
remove stains. This function is suitable for heavy dirt clothes.
ETRA RINSE
After set the function of rinsing adding, the program runs the rinsing process once again
before running the softening, and the total running time of the program increases
accordingly
3. CHANGE PROGRAMME OR OPTIONAL FUNCTION DURING OPERATION
Turn the programme selector knob on position "OFF" for 3 seconds to turn off the
machine;
Restart the machine and select new programme and options. If needed, select spin speed.
Re-press “Start/Pause” button to start new programme. Don’t add detergent any more.
4. PROGRAME END
The washing machine shows “End”at the end of the program, when the door is unlocked. If
the knob is turned to “Off”, the power will be cut off. If there is no button or knob
operation within 2 minutes, the program will automatically power off .
1. Turn the programme selector knob on position "Off" to turn off the machine;
2. Close the tap;
3. Open the door and take the washed clothes out;
4. Slightly open the door to remove moisture in the tube.
To Next Page
Loading...
Need help?
General
