Unpack your washing machine and check if there is any damage during the transportation. Also make sure that
all the items in the attached bag are received. If there is any damage to the washing machine during the
transportation, or any item is missing, please contact the local dealer immediately. Dispose the packing materials
The packing materials of this machine may be dangerous to kids. Please dispose them properly and avoid easy
touch by kids. Please dispose the related packing materials according to the relevant local regulations. Please do
no throw the packing materials away together with the other daily living rubbishes.
REMOVE TRANSPORT BOLTS
Before using this washing machine, transport bolts must be removed from the backside of this machine.
Please take the following steps to remove the bolts:
1. Loosen all bolts with spanner and then remove them.
2. Stop the holes with transport hole plugs.
3. Keep the transport bolts properly for future use.
SELECT THE LOCATION
Before installing the washing machine, the location characterized as follows shall be selected:
- Rigid, dry, and level surface (if not level, please make it level with reference to the following figure
“Adjust Leg”)
- Avoid direct sunlight
- Sufficient ventilation
- Room temperature is above 0 C
- Keep far away from the heat resources such as coal or gas.
Make sure that the washing machine will not stand on power cord.
Do not install the washing machine on the carpet floor.
To Next Page
Loading...
