PLACE OUTLET HOSE
There are two ways to place the end of outlet hose:
1. Put it beside the water trough.
2. Connect it to the branch drain pipe of the trough.
Position outlet hose properly so that the floor will not be damaged by water leakage.
Notes: If the machine has outlet hose support, please install it like the following pictures.
- When installing outlet hose, fix it properly with a rope.
- Position outlet hose properly so that the floor will not be damaged by water leakage.
- If outlet hose is too long, do not force it into washing machine as it will cause abnormal noises.
ELECTRICAL CONNECTION
- As the maximum current through the unit is 10A when you are using its heating function, please
make sure the power supply system (current, power voltage and wire) at your home can meet the
normal loading requirements of the electrical appliances.
- Please connect the power to a socket which is correctly installed and properly earthed.
- Make sure the power voltage at your place is same to that in the machine's rating label.
- Power plug must match the socket and cabinet must be properly and effectively earthed.
- Do not use multi-purpose plug or socket as extension cord.
- Do not connect and pull out plug with wet hand.
To Next Page
Loading...
