HELI CQDH13 - Lubrication Maintenance; Maintenance Instructions

17
33
Check the clearance of the electromagnetic brake
●
34
Check the emergency braking function
●
35
Check the reverse braking and regenerative braking
functions
●
36
Check belly switch function
●
37
Check steering function
●
38
Check lever switch function
●
39
Check whether the key switch is damaged and functional
●
Comprehensive
40
Check all labels for clarity and completeness
●
41
Check that the guard plate and/or guard are not damaged
●
42
Inspect tires and adjust or replace height if there is wear
●
43
Conduct a trial run
●
5.3.2 lubrication maintenance
Liquid medium
The use and handling of liquid media must be in strict accordance with the manufacturer's
regulations.
Non-standard operation will endanger the health and life of operators and the surrounding
environment. Liquid media can be stored in specified containers. The liquid medium may be
flammable and should not be near high temperature parts or open flames.
Clean container must be used when adding liquid media. Mixing different liquid media with
each other is strictly prohibited (except where mixing is specified in the instructions).
Be careful not to spill the liquid. If a liquid medium is spilled, a suitable adsorbent
must be immediately applied to the surface of the medium and the mixture of the liquid
medium and the adsorbent should be treated as prescribed.
Code
Name
Application
A
85 w/90
Gear box
B
L-HV32
The hydraulic system
C
Grease（withMus2）
Turning frame
5.3.3 Maintenance instructions
Preparation before maintenance operation
To avoid accidents during maintenance, take all necessary safety measures. The following
operations must be carefully obeyed:
 Park vehicles as regulation.