JS07N·JS07·JS08·JS12·JS14
1
Safety Rules
Danger
Failure to obey the instructions
and safety rules in this manual
will result in death or serious in-
jury.
Do not operate, unless:
√ You have learned and practiced the princi-
ples of safe machine operation contained in
this operator’s manual.
1. Avoid hazardous situations.
Know and understand the safety rules
before going on the next section.
2 Always perform a pre-operation inspec-
tion.
3 Always perform function tests prior to
use.
4 Inspect all the workplace.
5 Only use the machine as it was in-
tended.
√ You should read, understand and obey the
manufacturer’s instructions and safety rules
—— safety manual, operator’s manual and
machine decals.
√ You should read, understand and obey em-
ployer’s safety rules and workplace rules.
√ You should read, understand and obey all
applicable governmental regulations.
√ You are properly trained to safely operate
the machine.
Hazard Classification
products use symbols, color coding and
signal words to identify the following:
Safety alert symbol—used to alert
you to potential personal injury hazards. Obey
all safety messages that follow this symbol to
avoid possible injury or death
Red Indicates a hazardous sit-
uation which, if not avoided, will result in
death or serious injury.
Orange Indicates a hazardous
situation which, if not avoided, could result in
death or serious injury.
Yellow Indicates a hazardous
situation which, if not avoided, could result in
minor or moderate injury.
Blue Indicates a property dam-
age message.
Design intent
This machine is intended to be used only to
lift personnel, along with their tools and mate-
rials to an aerial work site.
Safety Sign Maintenance
Replace any missing or damaged safety signs.
Keep operator safety in mind at all times.
Use mild soap and water to clean safety signs.
Do not use solvent-based cleaners because
they may damage the safety sign mater.
To Next Page
Loading...