JS07N·JS07·JS08·JS12·JS14
6
Work Area Safety
Do not use controller to release the platform
when the platform is stripped, stuck or im-
peded its normal movement by nearby objects.
Everyone must leave away from the platform
before intending to release platform by
ground controller.
Use extreme care and slow speeds while driv-
ing the machine in the stowed position across
uneven terrain, debris, unstable or slippery
surfaces and near holes and drop-offs with the
platform stated.
Do not use the machine as a crane.
Do not push the machine or other objects with
the platform.
Do not contact adjacent structures with the
platform.
Do not tie the platform to adjacent structures.
Do not place loads outside the platform perim-
eter.
Do not push off or pull toward any object out-
side of the platform.
Maximum allowable manual force
Model
Platform
retracted
Extension only
JS0407NE,
JS0407NELi
400N
Only indoor-2P
JS0607,
JS0607Li,
JS0607E,
400N Only indoor-2P
JS0607W,
JS0607WLi,
JS0607WE,
400N Indoor-2P
200N Outdoor-2P
JS0808,
JS0808Li,
JS0808E,
JS0808ELi
400N Only indoor-2P
JS0612,
JS0612Li,
400N
Indoor-2P
Outdoor-2P
JS0612E,
JS0612ELi
JS0812,
JS0812Li,
JS0812E,
JS0812ELi
400N Indoor-2P
200N Outdoor-2P
JS1012,
JS1012Li,
JS1012E,
JS1012ELi
400N Indoor-2P
200N Outdoor-1P
JS1212,
JS1212Li,
JS1212E,
JS1212ELi
400N Indoor-2P
JS1414,
JS1414Li,
JS1414E,
JS1414ELi
400N Indoor-2P
Do not alter or disable the limit switches.
Do not alter or disable machine components
that in any way affect safety and stability.
Do not replace items critical to machine stabil-
ity with items of different weight or specification.
Do not modify or alter an aerial work platform
without prior written permission from the man-
ufacturer. Install additional devices for placing
tools or other materials on to the platform,
skirting boards and rails, it will increase the
weight of platform and increase loading of the
platform surface.
Do not place or attach fixed or overhanging
loads to any part of this machine.
Do not place ladders or scaffolds in the plat-
form or against any part of this machine.
Do not transport tools and materials unless
they are evenly distributed and can be safely
handled by person(s) in the platform.
Do not use the machine on a moving or mobile
surface or vehicle.
Be sure all tires are in good condition, castle
nuts are properly tightened and cotter pins are
properly installed.
To Next Page
Loading...