HELIX HLT3000 - Step 12: Installing Batteries

5/ COMPUTER OPERATING INSTRUCTIONS
Dot matrix display:
The dot matrix will be used to display
the Program prole for the active
program.
The table will change its pattern based
upon the Program chosen by the user.
Columns represent the progression
of time as the dot matrix screen lls
from left to right. Rows indicate the
resistance level by the number of LEDs
that are lit vertically. See table to right
referring to the Levels indicated.
Program Keys:
To the left and right of the large Dot
Matrix display are eight Program Keys.
These program keys can be used to directly choose a program. Alternatively,
the user can scroll the programs with the up or down key.
WhentheHelixcomputerrststarts,thisscrollingmessagewillreadacross
the Data Display Screen. “CHOOSE PROGRAM OR QUICK START”
Pressing the QUICK START key in the center of the console, will begin
the workout immediately with a default time of 20 minutes and Level 1 of
Manual mode.
- 14 -
A5-HLT3000 v3 proofed.indd 14 01/02/2011 10:21