HELIX HLT3000 - Page 9

3/ ASSEMBLY
- 9 -
Step 7:
Install the Handlebars one side at a time. First insert the wire coming out
from the handlebar into the upright and feed wires through the opening in
the top of the upright post.
Insertve(5)Allenheadboltstoholdthehandleinplacebuthandtighten
only. Repeat process for the other handlebar. Again, only hand tighten the
bolts on each side.
Hole to feed hand
pulse wire one on each
side of upright
Main computer wire
A5-HLT3000 v3 proofed.indd 9 01/02/2011 10:21