Heljan DCC User Manual

DCC / ANALOG TURNTABLE
84089121 Page 1
WWW.HELJAN.DK
MANUAL FOR DCC TURNTABLE
Contents:
Page:
 Introduction 2
 Before you get started 2
 Adjustment of tracks 2-3
 Connection – Wiring diagram 3-4
 Functions and overview of the Control Box 4-6
 How to program your Turntable 6
o Performing a reset / Menu point 7
o Calibrating the bridge / Menu point 7
o Setting a programmed stop of the bridge / Menu point 7-8
o Deleting a programmed stop of the bridge / Menu point 9
 Driving the bridge to a programmed stop / Menu point 9
 Maintenance 10
 FAQ 10-11
 DCC Uhlenbrock / Lenz / Esu 11
o Setting the Turntable´s digital address 11-14
 Technical Specifications 14
Please read the Manual carefully before installation and operation.
WWW.HELJAN.DK

Heljan DCC Specifications

General

Brand	Heljan
Model	DCC
Category	Turntable
Language	English

Summary

Connection and Wiring

Control Box Functions and Operation

Operational Modes Overview

Explains analog and DCC modes, and automatic operational mode recognition.

Settings and Movement Characteristics

Details on setting up to 48 stops and the bridge's programmed movement characteristics.

Control Box Interface and Usage

Power and Turntable Connections

Guidance on connecting the turntable and power supply to the control box.

Display and Function Key Guide

Explanation of the digital display and the functions of UP, DOWN, ESCAPE, and GO/SET keys.

Control Box Menu and Programming

Control Box Menu Points

Lists and describes the available menu points for turntable control and configuration.

Navigating the Control Box Menu

Turntable Programming Guide

Performing a Factory Reset

Calibrating the Bridge Position

Programming Track Stop Positions

Deleting Track Stop Positions

Driving the Bridge to a Programmed Stop

Maintenance and Troubleshooting

DCC Compatibility and Addressing

DCC Operation Overview

Setting Digital Address

Accessory Address Calculation