HELLER HTLW7 - Washing Program Selection; Water Temperature Control; Washing Process Steps

-8-
3.Water Temperature Selector
2.Washing Program Selector
The model has 6 programs to fit for different clothes quanlity. The default program is “Fuzzy”.
If other program is needed, you can press Program button to choose.
We recommend that you select 'Normal' program for a full load (7kg) of normally soiled clothes,
select 'soak' and set warm water level to 10.
After power on, the model of water temperature is Cold Water , if your needed water temperature
is Hot Water or Warm Water, pressing Water Temperature is available.
Wash
Rinse
Spin
4.Washing Process Selector
After power on, the default process is Wash, Rinse and Spin.
If needed, press the PROCESS button to choose the “Soak”process
(to keep the best wash ration of the wash powder and detergent)
Press the PROCESS button continuously, 4 process will circulate as figure below
Wash
Wash
Rinse
Rinse
Spin
Spin
Soak
Wash
Rinse
Spin
All manuals and user guides at all-guides.com