5.Water Level Switch
Choose the water level according to the wash loading, the table below offers the quantity of the
detergent or wash powder according to the wash loading(Only for reference)
6.Preset selector
1:Select automatic process or edit process by yourself
2:Press“PRESET”button continuously,the indicating window indicates the time needed for washing.
(Example:if the preset time is 8 hours,press the button till the window indicates 8.)
-9-
Water
Level
WashLoading
Water
Volume
Normal wash
powder
Concentratedwash
powder
40g/30L 25g/30L
9-10 5.5-7kg
62L 83g 52g
57L 76g 48g
7-8 4–5.5kg
52L 69g 43g
47L 63g 39g
5-6 2.5-4kg
42L 56g 35g
37L 49g 31g
3-4 1-2.5kg
32L 43g 27g
28L 37g 23g
1-2
Less than
1kg
24L 32g 20g
20L 27g 17g
3:Please close the wash lid completely.(otherwise the machine will give alarm)
4:The washing machine works according to the program you have set and shows the left time as you preset.
7.Press Start/Pause button,start the washing machine
The water inlet valve open, water come into the tub, when the water level reach to the set level, the
washing machine will start.
Please do not open the top lid when the machine has started, especially in the spinning, to prevent
the danger.
If you want to change your wash program after it has started, you can do so by pausing the current
washing cycle by pressing the Start/Pause button. You can then select your desired wash program.
At last press this button to resume washing with the new wash cycle.
Stand by Start Pause
To Next Page
Loading...
