Need help?Do you have a question about the HemoCue Glucose 201+ and is the answer not in the manual?
General| Calibration | Factory calibrated |
|---|---|
| Sample Type | Capillary, venous, or arterial whole blood |
| Measurement Principle | Glucose dehydrogenase (GDH) method |
| Sample Volume | 5 µL |
| Measurement Time | 40-240 seconds |
| Operating Temperature | 15-30°C (59-86°F) |
| Storage Temperature | -20-50°C (-4-122°F) |
| Power Source | 4 x AA batteries |
| Operating Humidity | 10-90% RH (non-condensing) |
| Weight | 350 g (with batteries) |
| Battery Life | Approximately 1, 000 tests |
| Dimensions | 85 x 160 x 43 mm |
Lists the HemoCue Glucose 201+ analyzer, mains adapter, batteries, and microcuvettes included.
Guides users through powering on the analyzer, initial checks, and display indicators.
Details the process for configuring audio alerts, current time, and date settings.
Step-by-step instructions for preparing the finger, collecting capillary blood, and performing measurements.
Procedures for collecting and measuring glucose from venous or arterial blood samples.
Instructions for executing QC tests to ensure analyzer accuracy and reliability.
How to view and scroll through stored measurement data on the analyzer.
Procedures for removing individual or all stored test results from the analyzer memory.
Guidance on connecting the analyzer to a printer and printing results.
Instructions for cleaning the cuvette holder and the analyzer's exterior surfaces.
A guide to identifying and resolving common error codes and operational issues.
Overview of the analyzer's system, theory, intended purpose, and limitations.
Information on dimensions, weight, operating conditions, typical results, and usage constraints.
Details on warranty coverage, supporting literature, and manufacturer contact information.
To Next Page
