Need help?Do you have a question about the HemoCue WBC DIFF and is the answer not in the manual?
General| Sample Volume | 10 µL |
|---|---|
| Reportable Range | 0.3–30.0 x 10^9/L |
| Measurement Parameters | Neutrophils, Lymphocytes, Monocytes, Eosinophils, Basophils |
| Sample Type | Capillary or venous whole blood |
| Operating Temperature | 15-30°C |
| Connectivity | USB, Ethernet |
| Calibration | Factory calibrated |
| Measurement Time | Approximately 3 minutes |
| Display | Color LCD |
Describes the HemoCue WBC DIFF system as an in-vitro diagnostic system for quantitative determination of white blood cells.
Identifies analyzer components and illustrates initial setup for power and connections.
Covers data entry devices, navigation principles, and analyzer settings configuration.
Details setup for printer, keyboard, and barcode reader connectivity.
Details procedures for collecting capillary and venous blood samples, including preparation.
Explains how to perform patient tests and quality control tests, including sample insertion and result confirmation.
Covers reviewing/deleting results and daily maintenance procedures for the analyzer.
Provides guidance on interpreting flags and error codes, with solutions for common issues.
Lists system specifications, performance, EMC, warranty, and safety information.
To Next Page
