7
Only use AC adapters listed under Specications in the AC Adapters section.
The analyzer can be powered by either AC adapter or batteries.
Connect the AC Adapter
1. Plug the supplied AC adapter into the power inlet at the back of the analyzer.
Insert Batteries
2. Press the ribbed marked button on the back of the analyzer to open the battery compart-
ment on the left side.
3. Gently take out the battery unit. Insert six type C (LR14/HR14) batteries, 1.5 V.
Observe the indication of polarity. Put the battery unit back in the analyzer.
Consult local environmental authorities for proper disposal of batteries.
To Next Page
Loading...
