11
Analyzer buttons
1. The three buttons below the display are for navigating and confirming the choices/sym-
bols displayed above each button. The left button is also for turning on/off.
External keyboard
2. Use the keyboard for data input e.g. Patient ID, Operator ID, Lab ID, Control ID and
Site ID. It can also navigate by using F1 for left, F2 for up/down and F3 for right.
For installation of external keyboard see Set-Up/Keyboard section.
External barcode reader
3. Use the barcode reader for data input e.g. Patient ID, Operator ID, Lab ID, Control ID
and Site ID.
For installation of the external barcode reader see Set-Up/Barcode Reader section.