HENDEN INSTALLATION & OWNERS MANUAL | 3
Contents
Henden Mineral & Salt Chlorinator
INSTALLATION
1. INSTALLATION INSTRUCTIONS 5
1.1 Installing the Power Supply 5
1.2 Connecting the In-line Electrolytic Cell to the
Power Supply 6
1.3 Connecting the Flow Switch to the Power Supply 6
1.4 Connecting the Filter Circulation Pump to the
Power Supply 6
1.5 Pre-start up procedure 7
1.6 Storage and safety 7
1.7 Mineral Salt 8
OWNERS MANUAL
2. IMPORTANT INSTRUCTIONS FOR USE 10
3. OPERATION OF YOUR HENDEN SALT WATER CHLORINATOR 11
3.1 Control panel layout 11
4. HENDEN CHLORINATOR SPECIAL FEATURES 12
4.1 System control (sanitiser output dial) 12
4.2 Polarity Indicators A & B 12
4.3 Low salinity indication 12
5. AUTOMATIC TIME CLOCK OPERATION 13
6. MAINTENANCE OF POWER SUPPLY 14
7. MAINTENANCE OF THE IN-LINE ELECTROLYTIC CELL 14
7.1 To clean the Henden In-Line Cell 14
8. DAY TO DAY OPERATION 16
8.1 Stabiliser 16
8.2 pH and total alkalinity 16
8.3 TDS levels 16
8.4 Running times 16
9. CHLORINE PRODUCTION 17
9.1 “Shock” treatment 17
9.2 Chlorine types and comparisons / max pool size 17
10. GENERAL INFORMATION 18
10.1 Pool water chemistry instructions 18
10.2 Common terms 18
11. TROUBLE SHOOTING 19
12. HENDEN
™
REPAIR OR REPLACEMENT GUARANTEE 19
To Next Page
Loading...
