Need help?Do you have a question about the Henny Penny CFE-410 and is the answer not in the manual?
Provides troubleshooting information in an easy-to-read table format.
Explains the use of DANGER, WARNING, CAUTION, and NOTE for safety information.
Details the procedure to isolate malfunctions, including defining problems and following correction steps.
Lists error codes and corresponding causes and corrections for system failures and warnings.
Step-by-step instructions for safe removal and installation of the fryer's control panel.
Details the process for performing a quick oil filter cycle, including pre-filter checks and error handling.
Guide to checking and replacing heating elements, including resistance tests and replacement procedures.
General| Model | CFE-410 |
|---|---|
| Category | Fryer |
| Power | 14 kW |
| Voltage | 208-240V |
| Control Type | Digital |
| Hertz | 60 Hz |
| Construction | Stainless Steel |
| Type | Electric |
| Oil Capacity | 40 lb |
| Temperature Range | 200°F - 375°F |
| Heating Element | Electric |
| Dimensions (WxDxH) | 15.75 x 31.5 x 45.63 inches |
To Next Page