User Manual – 9/34
You should now install the VirtualDJ DJC Edition mixing software on your computer:
- In the installation menu, click Install VirtualDJ DJC Edition
and follow the on-screen instructions.
The software is installed on your computer.
- To launch the VirtualDJ software on your Mac, go to Applications and then select VirtualDJ.
- Enter the VirtualDJ serial number, then click OK.
The serial number is found on the installation CD-ROM's envelope.
For more information on configuring your DJ Control MP3 E2, please refer to chapter 5.2. The DJ
Control MP3 e2 control panel.
3.2. DJ Control MP3 e2 and your computer's sound card
DJ Control MP3 e2 is inseparable from your computer's sound card, speakers and/or
headphones. It is your sound card that will process the music being played on your computer.
The DJ Control MP3 e2 software allows you to control the music being outputted from your
computer. As the DJ Control MP3 e2 connects to your computer via a USB port, you can connect
it or disconnect it at any time, even when your computer is powered on, although not when the
VirtualDJ software is in use.
To Next Page
Loading...
