DJMONITOR 42
4/10 – User manual
1.3. Recommendations
- Place your satellite speakers on a flat surface to avoid the risk of the speakers falling.
- Never open up your speaker kit, as you risk damaging its internal components.
- This speaker kit is intended for use in a temperate environment.
- To prevent the risk of fire or electrical discharge, keep your speaker kit away from:
- rain or humidity, as well as all fluids (water, chemical products or any other liquids),
- sources of heat such as heaters, stoves or any other heat-producing devices (including amplifiers),
- direct sunlight.
- Do not expose your speaker kit to drips or splashes of water.
- Never place any object filled with liquid (a glass, vase...) on your speaker kit.
- Unplug the power cable if you do not plan on using your speaker kit for an extended period of time. To
disconnect the power cable, take hold of and pull on the plug; never pull on the cable itself.
- Make sure that the speaker kit's power plug connected to an electrical outlet remains easily accessible.
- Disconnect the speaker kit before cleaning. Use a damp cloth and avoid using aerosol cleaners.
- The speaker kit's power plug serves to power off the device and must therefore be easily accessible at all
times.
- Attention: at full power, prolonged listening with headphones may cause damage to the user's ears and
hearing.
- Markings are located on the back of the speakers.
2. INSTALLING THE DJMONITOR 42 SPEAKER KIT
2.1. Positioning the speakers
1. Place the satellite speakers on a desk to either side of your monitor, keeping them at least 50 cm away from the
side walls.
2. Place the speakers at an equal distance from the listener and direct them towards the listening position.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
