To Next PageTo Next PageWhy Hercules Saw performance decreases over time?
If the performance of your Hercules Saw decreases over time, it might be because: * The blade is dull or damaged. Keep the blade sharp or replace it as needed. * The battery pack is wearing out. Replace the battery pack.
Why do workpiece cuts appear rough with Hercules Saw?
If the workpiece cuts from your Hercules Saw appear rough, it could be because: * The workpiece is being fed into the saw blade too fast. Slow down the speed at which you are feeding material through the blade. * The blade is too coarse for the material being cut. Use a blade with a finer pitch.
What causes frequent saw blade breakage in Hercules HCB79B Saw?
If you are experiencing frequent saw blade breakage with your Hercules Saw, it may be due to: * The blade being too coarse for the workpiece. Use a saw blade with a finer pitch. * The guide bar being misaligned or loose. Reinstall the guide bar as described in the Guide Bar Assembly section on page 7. * Possible blade weld cracking. Replace the saw blade.
General| No-load speed | 5500 RPM |
|---|---|
| Type | Circular Saw |
| Blade Size | 190 mm |
| Blade diameter | 190 mm |
| Max cutting depth at 90° | 65 mm |
| Max cutting depth at 45° | 45 mm |
| Weight | 4.2 kg |
