Maintenance
034-11471_1.1_11.10.2017
102
8.4.5.2 Cable-operated rim brake
(Alternative equipment)
The setting bolt on the brake lever of the cable-operated
rim brake is adjusted to offset the brake lining wear.
The free travel is the distance brake lever travels from
the initial position until it reaches its action point, i.e.
the point at which the brake takes effect.
In order to reduce the free travel and offset the
brake lining wear, screw the setting bolt out.
In order to increase the free travel, screw the setting
bolt in.
When the ideal setting has been made, the action
point is reached after 10 mm of free travel.
Figure 36: Brake lever (1), lock nut (2) and setting bolt (3) of the cable-
operated rim brake
8.4.5.3 Disk brake
(Alternative equipment)
The brake pad wear on the disk brake does not require
readjustment.
EN_034-11471_1.1_0.01_09.18_HERCULES BOSCH_Puria_Inhalt.book Page 102 Wednesday, October 11, 2017 1:59 PM
To Next Page
Loading...