034-11471_1.1_11.10.2017
75
Operation
7.6.5 Journey information
The displayed journey information can be changed and
partially reset.
7.6.5.1 Switching the displayed journey information
Press and hold the minus button (command
console with display) again for around two
seconds, until the desired item of journey
information is displayed.
7.6.5.2 Resetting the journey distance
Press and hold the plus and minus buttons
simultaneously for around three seconds.
RESET is shown on the display.
Continue to press the plus and minus buttons
together.
The item of journey information TRIP is reset.
7.6.5.3 Changing the unit of measure for speed
The speed can be displayed in either kilometres or
miles.
Press and hold the minus button for longer than
three seconds.
Press the On-Off button, holding it for less than one
second.
The speed display changes to the other unit of
measure.
7.6.5.4 Displaying system data
The drive system is switched off.
Press the plus and minus buttons simultaneously.
After three seconds, press the On-Off button
(command console with integrated display).
Press the plus or minus button repeatedly until the
desired item of system data is displayed.
EN_034-11471_1.1_0.01_09.18_HERCULES BOSCH_Puria_Inhalt.book Page 75 Wednesday, October 11, 2017 1:59 PM
To Next Page
Loading...