Hercules Montfoort Cruise F7 Series - Adjusting the Stem; With Quick Release

Adjusting the bicycle to the rider
034-11471_1.1_11.10.2017
54
6.3 Adjusting the stem
6.3.1 With quick release
(Alternative version)
 Open the clamping lever for the quick release on
the stem.
 Pivot the handlebars into the desired position.
 The handlebars click into place with an audible
noise.
 Lock the quick release.
 Check the clamping force of the quick releases.
Crash caused by incorrectly set clamping force
Excessively high clamping force will damage the quick
release and cause it to lose its function.
Insufficient clamping force will cause a detrimental
transmission of force. This will result in a crash and
injuries.
 Never fasten a quick release using a tool (e.g.
hammer or pliers).
 Only use the clamping lever with the specified set
clamping force.
CAUTION
!
EN_034-11471_1.1_0.01_09.18_HERCULES BOSCH_Puria_Inhalt.book Page 54 Wednesday, October 11, 2017 1:59 PM