Hercules Robert/a R7 Series - Preparing a Break in Operation; Carrying out Break in Operation

Transportation, storage and assembly
034-11401_1.0_24.08.2017
46
If the bicycle is to be removed from service for longer
than four weeks, e.g. in winter, a break in operation
has to be prepared.
5.2.1.1 Preparing a break in operation
 Remove the battery from the bicycle.
 Charge the battery to around 60% (three to four LEDs
of the charge status indicator light up).
 The bicycle has to be cleaned with a damp cloth and
preserved with wax spray. Never wax the friction
surfaces of the brake.
5.2.1.2 Carrying out break in operation
 Store the bicycle, battery and charger in a dry and
clean environment.
 Charge the internal battery in the display every
3 months for at least 1 hour.
 Check the charge status of the battery after
8 weeks. If only one LED of the charge status
indicator lights up, recharge the battery to around
60%.
The internal battery in the display discharges when it
is not used. This can cause it to be irreparably
damaged.
 Charge the internal battery in the display every
3 months for at least 1 hour.
NOTICE
Before longer periods without use, it is
recommendable for the HERCULES specialist dealer
to carry out servicing, basic cleaning and apply
preservative agent.