HermanMiller Aeron Disassembly For Recycling

Z
© 2014 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z, and Aeron are among the registered trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
1
Part no. 1b9vtf rev A.
Y
Aeron
®
Disassembly for Recycling
Tools Required:
Materials Identication and Segregation:
Disassembly Steps:
Power Driver
Safety Glasses
Torx Bit2 lbs Hammer
Rubber Mallet
Where possible, plastic components are marked with ASTM recycling codes. Use
these codes to identify material type for recycling. Non marked components should
be treated as mixed plastic. Ferrous metals can be identied using a small magnet
for recycling. Non-ferrous metals should be separated and recycled separately.
1. Lay chair on back.
2. Grasp and pull to remove
casters from the base.

HermanMiller Aeron Specifications

General

Chair Type	Office Chair
Weight Capacity	350 lbs
Warranty	12-year warranty
Material	Pellicle Mesh
Adjustable Features	Armrests, Seat Height
Available Sizes	A, B, C
Base Material	Aluminum
Frame	Graphite, Polished Aluminum
Weight	41 lbs
Color Options	Graphite, Mineral, Carbon