1HermanMiller Cosm
™
Chairs
To raise: While taking your
weight o chair, li lever up.
To lower: While seated,
li lever up.
At the proper height, your feet should
rest flat on the floor.
ATTENTION! ONLY TRAINED PERSONNEL
CAN REMOVE, REPAIR OR REPLACE THE
GAS LIFT MECHANISM.
Seat Height: Paddle-shaped lever on right side Arm Height: Lever on arm stem (only available on some models)
To adjust arm height: Squeeze
lever on arm stem while pulling
arm up to raise arm to desired
height. To lower arm, squeeze
lever on arm stem while pushing
arm down on armpad.
For maximum comfort, your arms should
make contact with the armpad without
any li at your shoulders.
Footring Height (only available on some models)
To adjust: Hold base with one hand,
grasp footring spoke and turn
counter-clockwise (-) to loosen.
Once loose, raise or lower footring
to desired height.
Hold collar with one hand, grasp
footring and turn clockwise (+) to
tighten. To secure, nish turning
footring while holding base.
HermanM iller
Cosm
®
Chairs Adjustment Guide
Adjustment Guide
To Next Page
Need help?
General
