HermanMiller Aeron
®
Chair Adjustment Guide1
Seating that
performs for you.
HermanMiller
Aeron
®
Chair
To raise:
While taking your weight o chair,
li lever up.
To lower:
While seated, li lever up.
At the proper height, your feet should rest flat on the floor.
Seat Height: Paddle-shaped lever on right side
To increase tension:
While seated, turn knob forward
(clockwise, toward + sign).
To decrease tension:
While seated, turn knob backward
(counterclockwise, toward – sign).
Set the tilt tension to control the resistance you feel when leaning back.
Kinemat
®
Tilt Tension: Long stem on right side with knob
Only available on some models.
To swing arms in or out:
While seated, grasp front end
of armpad and pivot it to the
le or right.
Adjusting arm angle can help support dierent types of work and shifts in
posture. Swing chair arms inward for support while using keyboard. Swing
arm out to support use of computer mouse.
Arm Angle: Front of each armpad
To raise or lower arm:
While seated, li lever to unlock.
Grasp base of arm support and raise
or lower to desired height. Lower lever
to lock.
For maximum comfort, your arms should make contact with the armpad
without any lift at your shoulders.
Arm Height: Lever on base of arm support
To Next Page
Need help?
General
