HermanMiller Aeron - Replacement Instructions Manual

HermanMiller Aeron Chair Assembly Instructions1
How to replace and assemble
your arm pads.
HermanMiller
Aeron
®
Arm Pad Replacement Instructions
Aeron Arm Kit (AE900)
For more information about our products and services or to see a list of dealers, please visit us at
www.hermanmiller.com/product-instructions or call 888 - 443 - 4357.
© 2015 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A. Part No. 1BFFV7 - B.
#2 Phillips Screwdriver
Parts Included
Tools Required
Safety Instructions & Warning
1.1
Place chair on protective surface and lay chair with the seat and back facing down.
2.1
Using #2 Phillips screwdriver remove screws.
Step 1 Step 2
• Read all instructions before using products
• Failure to fully tighten screws may cause injury
• Sitting or standing on product may cause risk or personal injury
• Periodically check fasteners to ensure tightness
• The right is reserved to make changes at any time without notice
Arm Pad (Qty 2) Flat Head #13 hi
lo thread screws
(Qty 4)