Adjustment Guide1HermanMiller Lino
™
Chair
To limit tilt range:
Sit upright, and turn backward
to increase the level of recline.
To release tilt limiter:
Sit upright, and turn forward to
limit the level of recline.
Engage the tilt limiter when you want to sit in an upright or partially
reclined position.
HermanMiller
Lino
™
Chair
To raise:
While taking your weight o chair,
li lever up.
To lower:
While seated, li lever up.
At the proper height, your feet should rest flat on the floor.
Seat Height: Paddle-shaped lever on right side
To increase depth:
Pull lever out, slide thighs forward
to adjust seat, release lever.
To decrease depth:
Pull lever out, push seat back,
release lever.
In the proper position, you will have approximately three-ngers of clearance
between the back of your knees and the seat edge.
Seat Depth: Lever under right side of seat
Only available on some models.
To increase tension:
While seated upright, turn knob
forward (toward + sign).
To decrease tension:
While seated upright, turn knob
backward (toward – sign).
Set the tilt tension to control the resistance you feel when leaning back.
For the Semi Synchronous Tilt with Tilt Limiter, the tension is pre-loaded to
adjust to the user.
Tilt Tension: Long stem on right side with knob Tilt Limiter: Knob below le side of seat
Available on most models.
To Next Page
