Power Driver T Bit T Bit
Tools Required
HermanMiller
Motia
TM
Sit-to-Stand Table Electric (Single Stage)
Leg Disassembly Instructions
How to disassemble your table leg.
Step
. Remove the screws using power driver and T- bit. . Remove the actuator palte from the leg.
Step
Disassembly Instructions1HermanMiller for Motia
TM
1BGYVJ rev B
WARNING
DO NOT PULL FROM CORD.
DAMAGE OR INJURY CAN
OCCUR.
NO JALE DEL CABLE.
PUEDE CAUSAR DAÑOS O
LESIONES.
To Next Page
Need help?
General
