HERO Passion Pro - ENGINE OIL REPLACEMENT; Engine Oil Replacement Procedure

19
7. Quantity of oil to be filled is 0.85 litre
(approx.) during oil change when right
crankcase cover is not removed.
8. Reinstall the oil level dipstick and check
for oil leaks.
7. Recheck the oil level.
8. Make sure that oil level is at the upper
level mark of the oil level dipstick with
the motorcycle in an upright position,
and that there are no oil leaks.
6. Stop the engine and let the engine oil
settle down.
2
1
(1) Drain plug (2) Sealing washer
ENGINE OIL REPLACEMENT
PROCESS
Drain the engine oil with the engine warm
and the motorcycle on its main stand.
1. To drain the oil, remove the oil level
dipstick and drain plug (1).
Fill the crankcase through the filler
hole with approximately 0.85 litre of
the recommended grade oil.
After the oil has completely drained,
reinstall the drain plug with a new
sealing washer (2).
Reinstall the oil level dipstick with a
new O-ring.