11/66
Error designation No. Brief description Page
°C / *-ERROR 51 Overtemperature on condenser 17
°C / *-ERROR 52 Overtemperature in centrifuge chamber 17
°C / *-ERROR 53 Temperature sensor in centrifuge chamber is
defective
17
°C / *-ERROR 55 Temperature sensor on condenser is defective 18
FU/CCI-ERROR 60 Faulty release signal to frequency converter
(drive-processor)
18
FU/CCI-ERROR 61 Frequency converter - error: computing section 18
FU/CCI-ERROR 62 Frequency converter - error: undervoltage 19
FU/CCI-ERROR 63 Frequency converter - error: overcurrent 19
FU/CCI-ERROR 64 Frequency converter - error: overvoltage 19
FU/CCI-ERROR 67 Frequency converter - error: overtemperature in
motor
20
FU/CCI-ERROR 68 Frequency converter - error: overtemperature in
frequency converter
20
FU/CCI-ERROR 82 Frequency converter - error: short circuit cut-off 20
FU/CCI-ERROR 83 Frequency converter - error: PFC-overload 20
FU/CCI-ERROR 84 Frequency converter - error: Frequency con-
verter recognizes
excess speed
21
FU/CCI-ERROR 85 Frequency converter - error: "Watchdog" in
frequency converter
had triggered
21
SENSOR-ERROR 90 No mains synchronisation 21
SENSOR-ERROR 91 Imbalance sensor - error 21
SENSOR-ERROR 92 Imbalance sensor - error 21
SENSOR-ERROR 93 Imbalance sensor – error: monitoring of the
temperature
22
NO ROTOR (95)* No rotor installed 22
TACHO-ERROR 96 Speed sensor at the bottom of the motor:
Speedometer pulses break down during rotation
22
N > ROTORMAX --- Speed in the selected program higher than the
maximum speed of the rotor (Nmax)
22
* Error number will not be displayed
To Next Page
Loading...
Need help?
General
