5/66
1 Introduction
• Repairs must only be carried out by personnel authorised to do so by the
manufacturer.
Interventions and modifications at centrifuges, which have been conducted
by persons not authorized by the Andreas Hettich GmbH & Co. KG
company, are at their own risk and entail the loss off all guarantee and
liability claims. In such an event any guarantee claim or liability claim
against the Andreas Hettich GmbH & Co. KG company expire.
• Only original spare parts and original accessories licensed by the Andreas Hettich
GmbH & Co. KG company are allowed to be utilised.
If no original spare parts or no original accessories are used, any guarantee
claim or liability claim against the Andreas Hettich GmbH & Co. KG
company ceases to exist.
• Information about the operation of the centrifuge please see operating instructions.
• We reserve all rights for these technical documents.
2 Symbol meanings
Symbol on the machine:
Attention, general hazard area.
Before using the centrifuge implicitly read the operating instructions and pay
attention to the safety relevant references!
Symbol in the repair instructions:
Attention, general hazard area.
This symbol refers to safety relevant warnings and indicates possibly
dangerous situations.
The non-adherence to these warnings can lead to material damage and injury
to personal.
Symbol in the repair instructions:
This symbol refers to important circumstances.
To Next Page
Loading...
Need help?
General
