HEVAC ENDEAVOUR V2 - User Manual

ENDEAVOUR V2 USER MANUAL
HEVAC CONTROL AGENCIES PTY LTD. 7/54 HOWLEYS RD. NOTTINGHILL, VIC. 95627888 www.hevac.com.au
28/11/19
V2 NEW FEATURES
1.) ADDED INDEPENDENT AUXILIARY TIME SWITCH
2.) EVENT DATA LOGGER
3.) FAN RELAY (R5) SETTABLE AS CONTINUOUS OR CYCLE
4.) ADJUSTABLE MIN. / MAX SETTINGS FOR Y1 & Y2 0-10v O/P's
5.) SUPPLY AIR TEMPERATURE SENSOR MONITORING INPUT
6.) EXTERNAL A/C FAULT (D3) & AUX I/P (D4) BMS MONITORING INPUTS
7.) ACTIVE 0-10vdc SENSORS NOW SCALABLE
8.) ADDED CO2 ON/OFF RELAY CAPABILITY CONTROL.
9.) CAN BE SET TO TIME SWITCH ONLY MODE (-NO TEMP. CONTROL)
10.) LOCKABLE 3 LEVEL MENU & SETPOINT ACCESS
11.) RECLAIM LOCAL SETPOINT CONTROL FROM REMOTE FOR SERVICE
12.) FURTHER ENHANCEMENTS TO HMI CONTROL OF ENDEAVOUR
v2

Summary

V2 New Features

Product Overview and Technical Data

Endeavour Controller Overview and External Connections

General description of the controller, its inputs/outputs, and external connection options.

Technical Specifications and Compliance

Detailed specs including general, analog, communication, environmental, and product standards.

Terminal Designations and Wiring Overview

Explanation of terminal functions and a basic wiring diagram.

User Interface and Operation

Control Panel Layout and Buttons

Description of the physical buttons and their navigation functions.

Display Screen and Status Indicators

Information on the LCD display and LED indicators for monitoring.

Keyboard Security and Lock Levels

How to manage keyboard lock levels for restricted access.

Programming and Configuration

Time and Event Scheduling

Setting clock, date, time switches, run timers, and holidays for system operation.

Relay and Analogue Output Control

Configuring relay modes, R5 fan control, and Y1/Y2 analogue output behavior.

Sensor Input Setup and Configuration

Setting up main, remote, O/A, supply air, and CO2 sensors.

System Application and Special Functions

Configuring night purge, Modbus, control application mode, and restoring defaults.

Site Program and Wiring Details

Typical Wiring Connections and Sensor Guide

Illustrates wiring setups and lists compatible sensors.

Site-Specific Program Information Forms

Forms for recording custom settings like time switches and holidays.

Configuration Summary Tables

Summarized tables for relay, analogue, and input settings.

HEVAC ENDEAVOUR V2 Specifications

General

Control Algorithm	PID, ON/OFF
Display	LCD
Output	Relay
Input Type	Voltage
Output Type	Relay
Communication	Modbus RTU