HEVAC ENDEAVOUR V2 - Time and Event Scheduling

8/28
SET
CLOCK
(TIME & DATE SETTINGS)
To edit the controllers time and date settings, press the fascia button labeled “ENTER”
to have the LCD display jump to the 1
st
menu item in the menu tree…. “
SET CLOCK"
Press the ENTER button to check and edit the controllers time, date and day
light saving enable (or disable) settings. Daylight saving, if enabled, starts on the
1
st
Sunday in October (at 2am) and finishes on the 1
st
Sunday in April (3am)
HEVAC CONTROL AGENCIES PTY LTD. 7/54 HOWLEYS RD. NOTTINGHILL, VIC. 95627888 www.hevac.com.au 22/10/19