6.3 Display mode
This meter is designed with three display modes:
Auto mode display
Meter default display mode is auto-scrolling display, after meter runs for a
certain time (for auto-scrolling display circle, default as 6 seconds), it will switch to
the next screen display automatically. Auto-scrolling display table is configurable, and
32 items can be configured at maximum, detailed display information please see
display list.
Manual mode display: Button display
When customer presses the button, meter will enter button-press display mode.
In this mode, after customer press display button once, it will switch to the next
screen display. When button-press operation is stopped, meter will return to
auto-scrolling display mode automatically in a certain time (default as 30 seconds)
when power is on, or enter power-off display mode when power is off. Button-press
display table is configurable, and 32 items can be configured at maximum, detailed
display information please see display list.
7 RTC
To Next Page
Loading...
