User manual for single-phase meter
21
13.3 Reinstall
In order to avoid the change of asset management, it’s recommended to reinstall the
METER at the former position.
The installation process detailed in chapter 16 "Installation and un-installation".
14 Scarp Processing
This chapter describes the right method of meter scarp processing.
Compliant ISO 14001 environmental certification specification, the components of
the meter is maximum extent separable, thus to provide corresponding abandoned
and recycling station after disassembled.
Attention: meter scarp processing reference to local waste and
environmental protection laws and regulations.
Meter can be disassembled into different parts, the recommended waste treatment
methods are as follows:
Recommend scarp processing method
Electronic waste, scarp according to local regulations
Metal parts, including iron part of
optical communication, terminal
connection copper bar, internal
current cables etc.
Provided to the metal material recycling
Recycle bin for plastic materials, otherwise can burn
15 Transportation and Storage
During the transportation and packing process, the products shall not be dramatically
shocked, and shall be transported and stored according to the regulations. Inventory
and storage should be made in a shelf with original package. The piling height should
be not more than eight layers. The storage place shall be clean, in which the ambient
temperature shall be - 40℃ ~ 70 ℃ and relative humidity not more than 95%. And
To Next Page
Loading...
