13
4.2.1.1 Measure (single array)
If you choose this item you can see a list of the available materials in the installed
sensor head. After the selection of the material the measurement screen opens.
Pushing <ENTER> starts the measurement and displays the result. If you have selected
multiple measurement cycles to calculate a mean value, you have to press <ENTER>
several times according to the cycle count. (Average value)
If the result is displayed you can store the value with its corresponding data like time
and material by pressing <SAVE>. If you didn’t press this key and a new measurement
has been started by pressing <ENTER> the current value will be lost.
To return to the menu item single array please press the button <ESCAPE>.
4.2.1.2 Show measurement value (single array)
With this item you can display stored single entries likewise a card file. Any
measurement value will be displayed with the corresponding material and the time
stamp.
4.2.1.3 Delete (single array)
Selecting this menu item will erase the single array after a safety check without erasing
the measurement arrays.
To Next Page
Loading...