14
4.2.2 Menu item measurement array
When selecting this item you can record measurement values in measurement arrays.
Measurement arrays are spreadsheets of measurement values, where the values
are recorded straight in columns from top to bottom and column-wise from left to
right.
Figure 7: Recording of values at a damp wall
This way to record values brings advantages for all applications, in which you want to
see the distribution of moisture in an area, e.g. the moisture distribution in a damp wall.
The measurement points should be picked up in the same manner as they will be
stored. A suggestion for such a measurement grid shows figure 7 (MP = Measurement
point).
Within a measurement array there are eight Layers
possible. Hence it is possible to measure the same
area with different sensor heads. Depending on the
character of the head you can measure in different
depths. In the software MOISTANALYZE you can plot
these layers.
Figure 8 – Menu item measurement array
damp wall
Column 3Column 2
Culumn 1
MP 1 MP 1
MP 1
MP 2MP 2
MP 2
MP 3MP 3
MP 3
Show measurement value
Edit note
Select
New
OKEscape
Measure
Delete
To Next Page
Loading...