Example 1:
Registration code requirements: FFFFFFFFFA+MAC+0F
Parameter content setting: %FF%FF%FF%FF%FA%MAC%0F
Actual data: FF FF FF FF FA 38 36 38 35 37 35 30 32 36 36 31 34 0F
3.6. Sending AT Commands in Network Mode
When the PC is directly connected to the AP hot spot or the PC and the module are
connected to the same router, the AT command can be sent through the network. For details,
see the Wi-Fi Config Tools tool.
http://www.hi-flying.com/download-center-1/applications-1/download-item-wifi-config-tools-v1-0
Android Version：
PC Version：
To Next Page
Loading...