HF HF-LPB130 - 3. TEST CASE; 3.1. Transparent Transmission of UART and Wi-Fi Module in AP Mode

http://www.iotworkshop.com 8 Copyright © 2013 . All rights reserved
3. TEST CASE
The software used in this article can be obtained from the High Flying website.
http://www.hi-flying.com/index.php?route=download/category&path=1_4
3.1. Transparent Transmission of UART and Wi-Fi Module in AP Mode
The test topology is as follows:
After power-on, the Power light is on, the Ready light is on, and the module is working
properly.
After the computer Wi-Fi searches for the AP hot spot of this device, it connects.