To Next PageTo Next Page
Need help?Do you have a question about the HGST HUS724040ALS640 and is the answer not in the manual?
General| Capacity | 4 TB |
|---|---|
| Interface | SATA 6 Gb/s |
| RPM | 7200 RPM |
| Cache | 64 MB |
| Average Latency | 4.16 ms |
| Load/Unload Cycles | 300, 000 |
| MTBF | 2, 000, 000 hours |
| Warranty | 5 years |
| Form Factor | 3.5-inch |
| Non-Recoverable Read Errors per Bits Read | 1 per 10^14 bits read |
Highlights safety warnings related to shock and ESD (Electrostatic Discharge) and user responsibility.
Describes drive performance metrics: mechanical positioning, seek time, latency, and transfer speed.
Specifies operating, shipping, and storage conditions for temperature and humidity.
Lists typical current and power requirements for various operating states.
Discusses uncorrectable data error probability and LDPC channel implementation.
Explains SMART parameters used for failure prediction and drive status.
States the target MTBF value of 2.0 Million hours.
Details random and swept sine vibration levels during operation, ensuring no errors.
Specifies vibration levels that the drive can withstand without damage.
Defines shock criteria for the drive during operation to avoid errors.
Specifies shock criteria that the drive can withstand without non-recoverable errors.
Lists compliance with EMI standards like CISPR22, EN 55022, FCC, etc., all Class B.
Certifies US and Canadian safety compliance for Information Technology Equipment.
Lists supported SAS features including compliance, protocol, and dual port operation.
Lists supported SCSI commands with their operation codes and page references.
Explains the possible values for the status byte and additional sense information.
Describes operating conditions preventing SCSI command execution and their priority.
Details the priority order of internal conditions affecting command execution.
Describes how commands are handled when other I/O processes are active.
Lists conditions that cause a unit attention condition for initiators.
Describes conditions that lead to an internal error during drive operation.
Defines the degraded mode and its causes, such as spindle motor or configuration failures.
Lists Unit Error Codes (UEC) and their associated descriptions for error reporting.
