9
V60 Getting Started
Solution
status
Version
Work mode
Latency
Channel
Common-sate
llites
Power
supply
PDOP
Data chain
Received signal
strength indication
Fig.1.2-1
Work mode
Common-satellites
Static file name
Fig.1.2-2
2. LCD Buttons operation
V60 GNSS RTK system can open/close the liquid crystal panel display by double clicking power
button. High-definition LCD panel with two buttons complete the basic work demands of receiver ,
which can set three work modes of base, rover station and static state flexibly. Detailed descriptions
of keys operation of control panel are as follows.
Double click button power to turn on the LCD, and the initial interface will display the current work
mode and relevant basic information.
To Next Page
Loading...
