Click "SAT Info", and Prn refers to
number of satellite, L1 refers to
signal to noise ratio of L1, L2 refers
to signal to noise ratio of L2 .
74
(3) Signal-to-noise ratio figure of satellite:
Prn refers to number of satellite; Azi refers to azimuth angle of satellite; Ele refers to satellite
elevation, L1 refers to signal to noise ratio of L1, and L2 refers to signal to noise ratio of L2.
After the settings for the above project and base as well as rover are
completed successfully, enter into data collection interface for collection.
And there are three collection methods.
1. Single-point collection,
2. Average collection,
3. Automatic collection. Corresponding collection methods can be selected
according to different demands.
3.2 Measurement and collection
Hi-Survey
To Next Page
Loading...
